I just assumed I would have no followers on Twitter except those interested in my particular MakerBot. But then I see people with HUGE numbers of followers/followees who are following me.
Thus, I ask these non-rhetorical questions: Do some people on Twitter follow you for the purpose of getting more followers in return? How could anyone with monitor more than a few dozen friends without giving up their day job?
A MakerBot operator in the SF bay area just ordered a roll of blue, red, green, and yellow each. With any luck we’ll be splitting it up among five people. I can’t wait!
Thanks @robwinton – I’m trying to find out why the hell WordPress is hating on all of my websites. :/
I’ve just prototyped my first part for a client! What fun!
He sent over some design files, we discussed some of the constraints of the MakerBot Cupcake CNC (overhang limits, printing resolution, ABS warpage, build sizes), went back and forth over several iterations of the design, and today I printed it up!
In getting ready to print his part I had tuned my ‘bot over the weekend. The part has the absolute smoothest sides I’ve been able to print on anything to date with minimal stringing. I’m really really proud of that print. The resolution came out so well I want to reprint several prior prints – such as the TARDIS and dalek.
Anyone want a second hand TARDIS?
I’m not sure what the hell happened, but this entire blog was scrambled to hell for about two hours.
If you got a totally different set of lasercut body panels and larger threaded/precision rods it would be a snap.
But how would you get more build space out of your MakerBot without a big structural change?
I’m not sure how I would go about it – but I suspect I would start by fiddling with the Y stage. As the smallest stage I suspect it may be the bottleneck.
You know, with a Bloom Box, a MakerBot, and enough plastic and time I could go completely off the grid.
Away from the things of man.
Suppose you had a one MakerBot and just had to have a second. How much would the rest of that MakerBot cost assuming you were willing to design and print every possible printable part? 1 Perhaps it would be in line with the $575 laserless MakerBot Cupcake CNC kit. Then again, perhaps it would be the cost of the $750 MakerBot Cupcake CNC Basic kit less the $50.00 lasercut plastruder parts and $200.00 lasercut body parts, which would clock in at $500.00. 2
Are you really just $500.00 away from a second MakerBot? That’s about half the cost of a Deluxe kit! This brings to mind an even MORE interesting question.
What would you have done if MakerBot offered this deal: Buy one Cupcake CNC Deluxe kit and get a Cupcake CNC Basic kit half off?
Well, if you already own a MakerBot, it’s like they gave you this deal anyhow!
I purchased the MakerBot Deluxe Cupcake CNC kit – which came with plenty of tools and TONS of plastic. The Deluxe kit came with things that you’ll need to operate your MakerBot such as the USB2TTL cable, power supply, and ethernet cables.
However, the wrenches and hex keys could be reused to build another ‘bot. Parts printed up on a MakerBot could be used to print several very useful, and sometimes expensive, parts for another MakerBot. The plastruder toolhead is $125.00 without the circuit board. If you could print up the dinos, printstruder, idler wheel, and insulating retainer ring, you’re replacing all of the lasercut acrylic parts ($50.00 at MakerBot). A persistent person could even replace all of the plastic spacers, wooden or plastic pulleys, the various wooden holders (Z rod caps, Z stage guides, X end rod caps), and probably even the entire Y stage with printed parts. 1
Heck, if you had all of those parts you would basically just need a box in which to install them all.
Hmmm. Anyone feel like designing a printable Y stage?
Recent posts to the MakerBot Operators group show some people’s frustrations with this growing company. 1 Yes, they’re out of stock of electronics and other parts, but they’re also doing their best to crank out as many kits as possible.
Overall, I’d rather have them churning out robot kits than keeping spare parts in stock. The plans for all of the electronics are open and free – you could have someone else fabricate them or build them yourself. Still others have started up businesses selling lots of replacement parts and even upgrade kits.
We might be impatient for our kits, but they’re literally devoting their weekends and free time to getting these kits to us. In fact, it’s their feverish dream to get a MakerBot kit into your hands. You’re just not going to get this kind of devotion and service anywhere else.
I have one piece of advice if you’re waiting for your kit to arrive or replacement parts to be back in stock: start designing stuff right now. You already know what you want to build. Just create a library of things you want to churn out. Upload them to Thingiverse, get feedback modify, and improve them. Heck, improve designs posted by others.
Your kit will be here before you know it and you’ll be happily (and woozily) sniffing ABS fumes too. :)
