How to Make Awesome Cardboard Paper Mache Anything

Awesome Paper Mache Hats

Awesome Paper Mache Hats

A few weeks ago a friend of mine had a “bad movie night” where he was showing the film1Sharknado.”  Inspired by the theme for the party, I decided I had to wear a shark hat for the event.  After making my hat, my daughter requested a monkey hat.  This was not a request I could refuse.

I took pictures of the process to show you how you can make your own.  I haven’t ever tried to make paper mache hats before, so this was not only a lot of fun – but a great learning experience.  While I own the really great paper mache monster books by Dan Reeder, I only used them for inspiration and tried out a few new things on my own.

Even though I used this process to make hats, the directions here could easily be adapted to making anything out of paper mache.

1. Step 1: Gather Materials and Tools

All the things you need to make your own awesome paper mache anything

All the things you need to make your own awesome paper mache anything

Here’s what you need to get started:

  1. Cardboard Boxes.  Cardboard forms the “skeleton” of the structure.  It’s cheap, ubiquitous, sturdy, and easy to cut and form.
  2. Masking Tape.  Once the cardboard has been cut, liberal use of masking tape will keep your creation together until it can be covered with paper mache.
  3. Scissors and Utility Knife.  Scissors can be very helpful in cutting cardboard or paper.  While scissors can be helpful, and appropriate for kids, I find a utility knife gets the job done faster.
  4. Measuring Tape.  If you’re not making a hat (or other apparel or armor) you won’t need this.  But it is helpful when making measurements.  ((In a pinch, you could just use a piece of yarn or string to mark lengths, and then put the yarn on the cardboard for reference.))
  5. Plastic Wrap.  Whether you’re working with gluey paper or paint, the process is messy.  I would recommend covering the work surface with plastic wrap.  I happened to have a really large plastic bag, which I taped directly to the table.
  6. Glue.  I just used a big bottle of Elmer’s white glue from the hardware store, but I’m pretty sure wood glue would have worked as well, if not better.  It’s also more versatile and sturdy.
  7. Plastic Tray.  The next time you get take-out or have a plastic liner from inside some packaging, save it.  It makes a great wide tray for mixing water and glue or when your project is dry, it is also great for mixing paints.
  8. Paper Grocery Bags.  The “twist” with this process is that I used torn up grocery bags, rather than the traditional newspaper.  It turned out this was a really good idea for a number of reasons.  Paper bags are a cheap and plentiful material.  When thoroughly wet strips of paper bags are easy to place, mold and shape. However, the most important features of paper bags is that they hold glue and water really well and then dry quickly into a sturdy hard shell.  In fact, they form such a sturdy surface that I only had to do a single layer of paper mache around the entire hat.  This means that you can quickly put down a single layer of paper bag strips all over your cardboard form, wait a few hours for it to dry, and then get to work finishing the project.
  9. Paper or Newspaper.  While grocery bags work really well to cover your cardboard form, they can leave some small gaps where they overlap.  When I found gaps in the project, I simply used a few thin strips of the newsprint style paper to cover the holes and smooth out spots on the rough paper bag layer.
  10. Cup of Water and Paintbrushes.  An old mug is best and pile of cheap dollar store brushes is probably fine.
  11. Paints.  I prefer acrylic paints.  They are cheap, can be diluted with water, easy to mix, they stay wet long enough for you to blend, but not so long that you have to wait days for it to dry.  They also clean up well with water.

2. Step 2: Create Cardboard Form

Process for creating awesome hat

Process for creating awesome hat

The process I used to create the cardboard forms for the hats was pretty quick and easy.  I measured the circumference of my daughter’s head and then the distance from her ears to the top of her head.  Using these measurements, I cut out a strip of cardboard as tall as the distance from her ears to the top of her head and as wide as the circumference of her head – with a little extra to allow for overlap.

This slideshow requires JavaScript.

In the pictures above you can see the strip of cardboard cut out and then taped into a cylinder with the masking tape.

This slideshow requires JavaScript.

Cut strips into the cardboard cylinder, fold them down, and add enough masking tape to mold it into a hat-shape.

3. Step 3: Add Embellishments

This slideshow requires JavaScript.

A paper mache hat is way more interesting with some kind of embellishment, like ears, shark fins, wings, or whatever else.  Here I cut ear shapes out of cardboard, curved them slightly, taped them to hold the curve, and then taped them to the hat.  When I made the shark hat, I cut a long slit into the hat through the tape and inserted the shark fin through the underside of the hat.  Don’t be afraid to use a lot of tape.

4. Step 4: Prepare the Work Surface, Paper Strips, and Glue Mixture

This slideshow requires JavaScript.

Cover the work surface with plastic sheeting.  I used a big plastic bag from a helium balloon order from my daughter’s birthday.  However, a big garbage bag or plastic wrap would also work well.  Paper bags from the grocery store work really well – but there are too thick in places.  Tear off the handles and pull the paper bag apart at the seams.  You’ll probably need to discard some of the sections where the the paper bag is too thick to use.

Add some glue (I used about a tablespoon) and warm water (about a half cup or so) to the plastic pan.  It should look like milk or heavy cream once you’ve mixed it up.

This slideshow requires JavaScript.

Completely soak the strips of paper bag in the glue mixture.  They should be completely soaked all the way through until they’re nearly translucent.  Unlike paper mache with thin pieces of newspaper, you won’t need to put layers and layers of paper on the form – just one layer where the pieces overlap a little should work fine.  The excess glue from the strips of paper will soak into the cardboard and help make the entire structure sturdy.

5. Step 5: Set Model to Dry, Patch Holes with Paper

This slideshow requires JavaScript.

Since the cardboard helps soak up the water, the entire structure should dry relatively quickly.  I put the shark hat outside in the sun for a few hours and it was ready for painting.  Once the hat is dry (or dry enough), you’ll probably notice some holes and gaps from the paper bag strips.  Tear up some newsprint paper, soak those in the gluey mixture, and cover and smooth out any defects.  Once these pieces dry, the project will be ready to paint!

6. Step 6: Paint to Suit

This slideshow requires JavaScript.

The great thing about acrylic paints is that they are so easy to work with.  They dry really quickly, so you can paint one side of the model, work on the other side, and then come back to the first side to add details.  In any case, just paint the project to suit and you’re done!

Each hat went together really quickly.  I put the cardboard form together in about 15 minutes, covered it with the gluey paper bag strips over maybe 30 minutes, let it dry for several hours, and then paint it over the course of maybe an hour.

If you make your own paper mache hat (or other sculpture), let me know in the comments!

  1. And I use the word “film” loosely here []

Tyvek Sled Kite… from office supplies

Tyvek Office Supply Kite

The picture to the right is of a kite that I built several weeks ago and only got around to actually flying this weekend.  It’s basically made out of office supplies.  :)

Originally I just wanted to make the Tyvek sled kite from the Howtoons shown in Craft Magazine, Volume 81  But then I wanted to see how much of the kite I could assemble just using things from the office.  The answer is, basically all of it.

The Howtoons calls for:

  1. A large sheet of Tyvek
  2. Tyvek tape
  3. A washer
  4. Ruler
  5. Scissors

Instead I used:

  1. Tyvek from Tyvek office envelopes, rather than a large sheet or roll of Tyvek house wrap.  My office is sent dozens of these things a day.  It didn’t take long to collect 30 plus.
  2. Clear packing tape.  I used this instead of Tyvek tape.  Tyvek tape would have worked a LOT better, but I have no complaints.
  3. Rather than use a washer, I used a spare keyring.  I had other various office supply bits hanging around in case this didn’t work out.  Paperclips, binder clips, etc.
  4. Yardstick.
  5. Scissors.

Since the envelopes are significantly smaller than the sheet of Tyvek rolls, I had to either make my kite smaller or stitch them together into a larger sheet.  I did both.  I scaled the plans down to about 2/3rds the size from the diagrams and then used packing tape to put them all together.  To get the most surface area out of each envelope, I burst all of the envelopes at the seams and then taped them up.  Once I had a 36″ tall sheet, I started cutting it into the pieces I needed, re-taped it back together as indicated by the diagram, and then set it aside for weeks while I didn’t fly it.  :)

On the day of the launch I made the tail out of strips of leftover envelopes taped together with the gluey bits from some of the envelope flap sealants and more packing tape.  I punched a hole in the three ribs using a pen, ran the line through each of the three ribs, reinforced it with more packing tape…  and launched.

The only non-office supply things used in the construction were:

  • Crayons for coloring the kite (hard to see)
  • The ruler – I don’t have a yardstick at work
  • The kite line, purchased from Amazon

It flew pretty well.

  1. I found a copy of all three pages after googling around a little.  Howtoons: Sled on a Thread pages 1 2, 3 []