Category: Random Nonsense

Sometimes I just feel compelled to share nonsense, random thoughts, and sometimes just stuff I want to save

Yay!

[pdrpiechart data=”Yes. Ill even donate a dinosaur. Or laser.=27|Only if they promise to make him blog LESS. =4|No freaking way. I hate that guy.=2″]

As you may have heard, I have finally worn down the resolve of MakerBot Industries.  They’ve agreed to hire me to blog for them! 1  The negotiations were long and grueling, with tough concessions on both sides.

I promised to stop hanging around outside the BotCave, move back to California, and blog less.  In exchange, Bre promised to drop the restraining order.  This is really a win-win for everyone!

  1. Suckers!  I would have paid them to do it!  THANK GOD no one reads this blog… [↩]

Maybe you guys can help

My recent post about We Alone On Earth’s MakerBot woes (and some solutions!) caught the attention of some people on Twitter, including Tim freaking O’Reilly.  As in Make Magazine, Maker Faire Tim O’Reilly.

Guys, if you have any sway with MakerBot Industries, tell them to hire me to blog for them already.  :)

Poll dancing

[pdrpiechart data=”Yes. Ill even donate a dinosaur. Or laser.=25|Only if they promise to make him blog LESS. =3|No freaking way. I hate that guy.=1″]

96% of people polled want MakerBot to hire me to blog for them.  4% hate me and would rather have a sharp poke in the eye than read another word I’ve written.  Oh well, you can’t live your life without controversy.

I’m leaving this poll open until MakerBot hires me, so we should all just get used to it.  :)

Google Maps – a stalker’s best friend

It gets cold in NY at night
It gets cold in NY at night

Ah, Google, you always know how to build an online tool that straddles the line between helpful and creepy.  Streetview plus Google Maps?  You are truly mana from heaven for stalkers.1

So.  It gets kinda cold outside at night.  I forgot to bring a sleeping bag, so I’ll just crouch down into a little ball, huddled over this laptop for light and warmth. 2  That Penke truck has moved since the Google van took that picture, so there’s not much of a wind break.

You guys going to let blog for you, or what?

Could I at least get a tour of the BotCave?

  1. Not that I know anything about stalkers.  Because I don’t. [↩]
  2. A modern day hobo-caveman.  Robo-caveman?  Scrawling my dreams on the internet walls. [↩]

Counter proposal for MakerBot Industries

Sometimes you just need to turn a problem on it’s head.  I see that’s it been over a week since I submitted my job application. 1

So, here’s my counter proposal – I will continue to blog incessantly UNTIL you hire me!  Ha – and you thought it was going to be irritating to have me camp out outside, not showering, and stinking up the joint.2 Just wait until I clog up the RSS feed with every bit of nonsense I can dream up. 3

  1. That’s right, I stayed up until 1:27am on Wednesday morning writing it, overslept, and was late to a meeting the following morning…  Worth every moment. [↩]
  2. You see, I’m not above harrassment. [↩]
  3. For those astute readers, you’ll notice I actually added a new category to this blog.  Some posts are now categorized as “Random nonsense.” [↩]

Note to self, too

The Mummy Box Set - and detail of box
1. The Mummy Box Set - and detail of box

One of my favorite movies is The Mummy, and the coolest prop in the movie is a hexagonal puzzle box. When I get a chance, I’d like to design this object too. Here are some photos and informative links I’ve found:

  1. The cover of the Mummy Box DVD Set.
  2. What appears to be a homebrew prop replica.
  3. What appears to be an actual movie prop.

Sure, it’s frivolous.  However, I like the design challenge inherent in replicating this prop, getting the pieces to fit, perhaps even getting it to spring/pop open.

Home brew prep replica
2. Home brew prep replica
Mummy Puzzle Box Stats
Measurement of height 6-7/18″
Measurement from front to back 3-3/4″
Measurement of width, all sides 2-3/4″
Measurement of width, corner to corner 2-3/4″
Measurement of height 1-1/2″
Measurement of width, from base 5″
Measurement of all links 1-1/4″
Color Antique Gold
Other design details Top shows Seti I’s Horus name (men-maat-re), flanked by Anubis on the left and a male figure on the right, separated by vertical lines. Sides are inscribed with haphazard hieroglyphs including “Son of Re” and “Amen-Re.”
Puzzle Box - full picture
3. Puzzle Box - full picture
Puzzle Box close up
3. Puzzle Box - close up
3. Puzzle Box - side view
3. Puzzle Box - side view

Fourth wall

Yesterday, just as an experiment, I tried to blog all of my the MakerBot related ideas and reactions.  Here’s the result:

  1. Thank you MakerBot!!! [144 words]
    1. Thanking MakerBot for sending fluorescent red ABS and a spare parts kit along with my birthday order.
  2. Anticipation [140 words]
    1. Likening waiting on my application for the MakerBot blogger position to waiting for my grad school entrance results.
  3. MakerBlock’s MakerBot setup [376 words]
    1. Description of how my MakerBot is situated on a repurposed library card catalog.
  4. Why I want to work for MakerBot? [57 words]
    1. A few words about why I want to work for MakerBot.  I’m kicking myself for not including this bit in my application.  :/  Argh!
  5. Poll results so far [54 words]
    1. Of the poll respondents so far, one person wants MakerBot to hire me so that I will stop blogging so much.
  6. Plastruder MK5 plans released! [529 words]
    1. Thoughts on the new Plastruder MK5 plans – this was posted after someone noticed the MK5’s appearance in the photostream and wiki instructions, but a few hours before it was on their official blog or in the store.  Thus, some thing wondered about may not be accurate.  Fair warning.  Oh, and I included a picture of a Cyberman because Cybermen are cool.
  7. Plastruder MK5, now with 85% less heartache! [276 words]
    1. Don’t get me wrong – I love my Batch 9 ‘Bot.  However, the Plastruder MK4 has been challenging on occasion.  This is basically a list, with Beak90’s help, of all the problems the revamped Plastruder designs should resolve.
  8. Why should you buy a MakerBot sooner, rather than later? [280 words]
    1. I can see not jumping into a first generation hybrid car, digital camera, or MP3 player.1  When a product comes with such a clear2 upgrade path, nothing you invest in will ever be truly obsolete.
  9. Why Tweet? [64 words]
    1. When their slogan has to do with following others and having people follow you, “Bleeter” just makes more sense.  This post was inspired by my thinking about recent Twitter activity.  And, the only reason for my Twitter account and the people that I follow is because of my interest in MakerBot.
  10. MakerBot Business Idea #5 [237]
    1. I’ll cut to the chase here: The idea is to start a small scale small replacement/repair business and advertise at your local hardware store
  11. What’s the minimum cost to upgrade to a MK5 Plastruder? [95 words]
    1. Sourcing a minimum number of parts from MakerBot for the new MK5 Plastruder.  (Spoiler:  It looks like $106 in new parts.)  Guys, any chance we can see a Plastruder MK4 to MK5 upgrade kit?  I wouldn’t mind a MK4 to MK5 upgrade that excluded prior upgrades like the MK5 gear and relay board kit to reduce duplication for early adopters.  :)

2252 words blogged in one day – NaNoWriMo, here I come!

  1. I had to own the Rio PMP300 when it first came out in 1998!  And yet, I still have never owned an iPod or iPhone.  Go fig. [↩]
  2. And nigh inevitable [↩]
Test