Tag Archives: profile

ProfileMaker update

Posted on by

I’ve made a few slight modifications to ProfileMaker.

First, after testing it seems that the apparent optimal W/T is approximately 1.67 or so.  Using this value for target W/T setting has lead to my cleanest and most sturdy prints.  Admittedly, I haven’t done proper science-testing to determine the optimal value – but I do not believe it could be far off.  Thus, I’ve removed this setting option and ProfileMaker will calculate the optimal thread width based upon a W/T value of 1.667 and whatever layer thickness you choose.

Secondly, I’ve removed the automated profile creation system.  Not many people seemed to be using this and this feature gets quickly outdated a new versions of ReplicatorG are released.  While the five critical settings provided by ProfileMaker have been unaffected by recent changes to ReplicatorG’s Skeinforge engine, lots of the other settings have been juggled around.  Skeinforge is too much of a moving target for me to try to keep up.  Ideally, you’ll find a good set of profile settings you like and will still be interested in using ProfileMaker to adjust the five critical settings.

It is my hope that by making these minor changes everyone will have an easier time using ProfileMaker and get better results.

Please let me know what you think!

ProfileMaker – Crippled, but back…

Posted on by

At least for the time being.  :)

I’m guessing that only about 10% of ProfileMaker users were using the complete profile feature.  For those of you who didn’t use it, this feature would use your inputs to create an entire Skeinforge profile, zip the whole thing, and e-mail it to you. 1  However, this 10% use case was probably accounting for a huge portion of the server load.

I’ve disabled the e-mail-a-profile feature to see if this will help.  Let’s cross our fingers and hope!  As a friend of mine always says, these are good problems to have.

  1. Pretty convenient, really. [↩]

ProfileMaker Version 2.0 is coming!

Posted on by

A few cosmetic details to work out yet…  but I’m almost ready to launch the second version of my ProfileMaker.  I released the first version late last night.

I’d like to think that I’ve increased the number of options while still keeping a slim and intuitive user interface.  I would really appreciate any comments, criticisms, or questions you may have.