Tag Archives: mini-maker faire

Upcycling Plastic Bags into Fabric

Posted on by
Releve Design - How to Fuse Plastic Bags

Releve Design – How to Fuse Plastic Bags

Last year was our family’s second time at the East Bay Mini Maker Faire.  October in Oakland tends to be a really rainy time – and the last few EBMMF’s are no exception.  The rain didn’t seem to dampen the crowds or diminish attendance, but it did make the experience a little more trying.  ((Don’t get me wrong – I love Maker Faire, even little ones.  But, the EBMMF has been a tough one to love.  There are small with tight quarters inside classrooms or open spaces outside – in the rain, there were long lines for the very few food options, and most of the vendors ran out of food really early on))

So, the point behind this post – I learned something really awesome I’ve been looking forward to putting to use.  Some ladies, unfortunately I don’t recall who, were teaching people how to fuse plastic bags into a fabric.  The basic process was shockingly easy – layered sheets cut from plastic shopping bags are ironed together between protective layers of paper.  This one site has a good detailed description of the process with lots of tips and suggestions.

I’d love to make a bag, backpack, project enclosures, package linings, maybe a kite, and/or parachute using this stuff.

Mini Maker Faire East Bay

Posted on by

So, this year’s mini-Maker Faire East Bay (Oakland) was SO much better than last year.  Last year it was pouring rain the whole time.  Not entirely prepared for precipitation, I got soaked.  Even so, we had fun.

But, this year we had a great time overall.  The weather was mild and nice.  A little breezy, but pleasantly so.  I lived in Oakland and Berkley for about five years – just ideal weather. 1

One of the fantastic and slightly unfortunate things about the mini and non-mini Maker Faires is that there is so much to see.  There’s just no way to see even a large fraction of what people have brought to show off.   After having attended two full sized Maker Faires and two mini-Maker Faires, I’ve developed somewhat of a method for experiencing them.

  1. I accept that I won’t get to see everything.  Whether it is one or two days, there will never be enough time to see everything.  And, taking into account the whimsical nature of children, we will probably arrive about 3 hours after opening and need to leave 1 hour early.
  2. The best I can do is check out the list of makers and prioritize just a small few.  Of that small list of must-see makers, I separate out those ones that have websites and those that do not.  If all else fails, I can always look up those makers who have websites.  The best part of seeing a maker’s exhibit is being able to actually talk to them.  But, checking out their website is a close second.
  3. Traversing the paths from one priority maker exhibit to the next, I’m bound to see additional cool makers’ exhibits.  I try to take the time to check out their exhibits and locate their contact information.  Thankfully, it seems a part of DIY maker culture is to share and document everything about what they do.  I like to take a picture of their exhibits, signs, and perhaps one of their brochures, stickers, or cards.

Here’s the only downside from today – the food situation this year was a bit rough.  There were a few food carts, but the lines were insane and the food slow.  When I heard from one couple that they spent 45 minutes in line and 45 minutes waiting for their food after they ordered, I knew we were in trouble. 2  Even if this couple was exaggerating their wait times by 100%, 45 minutes is a LONG time to wait for food when you’ve got a hungry little one.

  1. It’s never too cold, too hot, too windy, too rainy, never humid, just sunny enough, just breezy enough, clear skys all the time. [↩]
  2. I saw them get their food about 5 minutes after they said this [↩]

Would you be interested in some free MakerBot prints?

Posted on by

I have this pile of printed PLA pawns I’m not going to be using any time soon.  They’re of varying quality and interesting-ness.  If you’ve always wanted a MakerBot printed part but thought they were just too unattainable, now’s your chance!

I’m going to be at the East Bay Mini-MakerFaire this Sunday just walking around with my family.  If you’re going to be there too, drop me a line or leave a comment and I’ll bring a spare piece for you.  I’ll have at least nine pieces to give away.  (More if I try a few new settings.)  If you’re the only one to respond, you get all nine.  :)