Is this irony?

I don’t actually remember the definition of irony.  I do, however, remember the scene from Reality Bites that highlights the importance of knowing the definition. 1

Uh, my point.  Yes.  My point.

I’ve got a song stuck in my head and I cannot stop listening to it.  Just Can’t Get Enough by the Black Eyed Peas.

  1. Also, I have a friend who refers to things as ironic, when they’re clearly not.  I suspect he might be confusing irony with coincidence.  “Ten thousand spoons when all you need is a knife” – now THAT is irony. []

Fumigation

Yesterday I was busy cranking out printed parts and soldering some of the components of my MakerBot interface kit.  I’ve printed 60 of these parts so far.  What I did was organize the letter bracelet sections into plates of 10 parts each, in a Scrabble tile letter distribution.  I’m not sure why, except that it seemed like a good way to get a good vowel to consonant ratio.  In any case, I’ve printed up 6 of these plates so far, with 4 more to go. 1  I’ll need to upload these plates as a derivative.

The room smelled of ABS fumes and solder basically all day.

On the plus side, these heady vapors made me believe I had super powers for a short time.

  1. 100 tiles, 98 letters and two blanks – which I’m printing with stars on them, rather than actual blanks. []

Shark + Tank – Lasers

I watched a show called Shark Tank on the recommendations of a friend.  It’s basically this – an inventor or business person pitches their idea to and answers questions from four or five potential investors who are using their own money.  These investors will either decline or make an offer – combinations of cash, equity demands, business concessions, etc.

I had watched a TV show about inventors a few years ago.  The stories were varied.  From people who spent years of their lives, all the money they had, all the money they could borrow, and squandered it all for lack of just a little bit of market research. 1  Others were people who had pushed their ideas as far as they could go by themselves but couldn’t move them any farther without additional backing, marketing, or connections.

Tonight there was this guy who had raised $600k from friends, family, and an undisclosed angel investor. 2  He had no patent, his now ex-CEO didn’t even try to get him a deal with a major company, and he refused to answer a single yes-or-no question in a straightforward manner.  The best offer he got was to be bought out for about $250k, he would be fired, and he would have a 7% royalty in perpetuity.  He turned it down and was offended.

Here’s the thing I’ve learned about business.  If you’re running a business, you do what’s best for the business.  I rather like my other business.  That said, if I believed the best thing for that business was to cash out and toss the keys to a new owner, I’d do it.  In the words of a famous businessman, “It’s not personal, it’s just business.”  True business, the exchange of goods and services for money, has almost nothing to do with ego.

Um, I wasn’t really going anywhere with this.  I guess I was just really shocked this guy would turn down that offer.  I was surprised that he’d put his ego ahead of his business and business interests.  But, hey, it’s good TV, right?

  1. Seriously.  There was one guy who was pitching this coffee mug that you put grounds into the cap, poured boiling water into, and had instant fresh coffee.  He spent years of his life, thousands and thousands of dollars…  and then was told by a potential investor – on the show – that they thought the idea was brilliant!  And, they thought it was brilliant the first time they saw it years ago in some cold environment where it was literally commonplace. []
  2. I’ve got $5 that says it was his wife. []

One monkey down…

The end of the month is always CRAZY busy for me at work.

Sooo…  with varied interests I start lots of projects, join lots of groups, and end up with lots of commitments.  I took on a rather big commitment (basically to edit a reference text related to my area of work) about six months ago.  This project had been weighing on me since then and finally came due very recently.  However, yesterday I completed it my obligation, turned it in, and am done!

I can’t tell you how good this feels!

Kaaaaaaaahhhhhhhhhhhhhhhhhn!

Now, picture me yelling the words, “Google Groups” like that.

Just what the holy hell do I need to do to be able to view Google Groups?  I can’t view them when I’m logged in.  I can’t view them when I’m logged out.  I can’t view it with ANY of my Google accounts.  WHY would you do this???  Google, whose entire business model is built on convenience has decided to essentially create a wall around Google Groups.

I’m seriously serious – do you know?  What do I have to do?  Sign up for another account???

Have you ever tried to microwave a printed part?

I’m very curious what would happen, but don’t want to try this with my home kitchen microwave.  If you have tried it, what did you discover?  What do you think would happen?  Is it a bad idea?  I haven’t tried it in part because I think it sounds like a bad idea…  What would happen with ABS?  With PLA?