Tag Archives: library card catalog

Robotics Work Area

Posted on by
My work area

My robotics work area

I thought people might be interested in seeing what my robot work area looks like. 1  Part of this last weekend was devoted to organizing the contents of the above library card catalog, putting things in appropriate drawers and labeling them. 2

You can’t really tell from the photo, but each of the Three-Dee printing ‘bots is sitting on a separate filament spindle kit.  I’ve got clear MakerBot PLA loaded underneath the Thing-O-Matic (“Flexo”) and black MakerBot ABS loaded under the Cupcake CNC (“Bender”).3 On the surface of the card catalog you can see a pink bracket I printed for my daughter so we can hang a bathroom towel4 at her level.  I’ve got a power strip duct taped down to the back left of the card catalog.  This has made the entire thing the perfect stand-up computing and soldering station.5

The drawer labels are difficult to read from that image – in large part because of my tragically terrible handwriting. 6  In case you’re interested, the highlights are:

  • Two different drawers labeled, “GLOWSTICKS”
  • One drawer labeled, “GLASSES”
  • One drawer labeled and filled with “NOTEBOOKS”7
  • One for “SPEAKER BADGES” of various kinds.  Admittedly, most are just from attending different conferences.  About a third are from when I was speaking at such conferences.
  • One drawer labeled and filled with various kinds of “TAPE”
  • One for “ORIGAMI” with paper and half-completed projects
  • One for “SANDPAPER” of differing grades
  • One drawer for “CABLES” and one for “USB CABLES”

I’m probably using almost 30 drawers, which is only half the front side of this library card catalog.  It’s got 60 such drawers on the front and back. 8 910  This monster occupies what was originally called a “living room.”  Now we just call it our “robot room.”  I was lobbing to change the name to either “The Robotics Lab,” “The Lah-BOHR-Ah-tory,” or the “Laboratory” but the idea did not receive the required 67% of household votes.

The way that I look at it – I could quadruple my robotics hobby and still have enough drawers for it all…

  1. It’s a bit messy, but worlds better than before I tidied it up. [↩]
  2. I had posted a description a while back, but this probably explains it all much better. [↩]
  3. FYI, Flexo has a small magnet installed behind the front panel.  That way I can affix a detachable magnetic soul patch. [↩]
  4. What color do you want, honey?  “Pink, PINK!”  *sigh* Now, if ONLY we had a robot that could make a pink towel hook for you…  “Daddy, stop being silly.  Of course we do!” [↩]
  5. I use a long wooden tray when I solder or assemble something with small fiddly bits.  That way if I drop something it falls into the tray. [↩]
  6. If anything, the JPG compression probably helps the readability. [↩]
  7. Including my DIY homebrew recycled paper and shopping bag analog notebook [↩]
  8. The sad part is this thing is SO huge and SO heavy that if we move, we’ll never be able to take it with us. [↩]
  9. It took an unreal amount of fuel, beer, and pizza to move it to where it is today. [↩]
  10. If you live in the Bay Area and are interested in it – drop me a line. [↩]

MakerBlock’s MakerBot setup

Posted on by

I’ve posted about other people’s MakerBot work space set ups,1 but not much about my own yet.

Right now there’s a bunch of junk2 in the way so no pictures of the setup for now.  My MakerBot – “Bender,” a laptop3 , and a large long cardboard box with a wooden dowel running the length with badly cut cardboard spools holding what was once a 5 pound coil of black ABS4 , a very nearly 5 pound coil of clear PLA5 , and a full pound of white ABS I’ve never used. 678

All of this resides in our living room on an enormous former-library card catalog.  For those of you youngsters out there, a library card catalog is the kind of thing you see in the background scenes of Warehouse 13.  Imagine a huge chest about four feet tall that has lots of small, deep, drawers.  It is what libraries used to use to store information about their collections – an analog database.  Frankly, I didn’t realize the one I bought was quite so large. 9  It’s literally big enough for about six identical MakerBot/laptop/plastic coil setups to the one I have. 10  The drawers beneath the area where my Makerbot resides are devoted to tools and spare parts.  Right now the surface is covered in a number of unfinished projects and some totally finished projects.

Library card catalogs are super handy and useful ways to incorporate storage and a raised level surface for working.  The only problem is that these things are absolutely enormous and way way heavier than they look.

  1. Mattpr’s MakerBot cart , Tony Buser’s “Tea” #481 [↩]
  2. FYI, junk = stuff waiting to be made into other, more useful or more amusing stuff. [↩]
  3. Named Bleys, if you must know. [↩]
  4. I would guess I’ve used about a pound over the last 8 months.  5 pounds is a LOT of plastic.  Dear faithful ABS, oh how I love thee… [↩]
  5. Polly!!!!!!!!! [↩]
  6. Though, I have very specific and immediate plans for it. [↩]
  7. More on this later if you remind me.  I have a tendency to get lost in nested footnotes and parenthetical references. [↩]
  8. Seriously, just imagine what my PHP code looks like.  Yikes! [↩]
  9. Or far away.  Or would become so expensive.  That’s a story unto itself. [↩]
  10. I best get printing more MakerBots, no?  Hmm…  I might have to print more laptops too… [↩]

Vouyerism

Posted on by

One of the interesting things about following along on other people’s MakerBot/RepRap/RepStrap blogs is seeing their workshop/work areas.  Some people have super organized, labeled boxes, and a clean clear uncluttered work space.  Others… are more like me.

  • Photos: I take photos of parts sitting on a sheet of white A4 paper that is being propped up against something.  With a light source it makes for a very clean photo.
  • Working on small parts: I have a long shallow wooden box – about 4′ x 8″ x 2″.  It’s small enough I can put it on nearly any surface, or even the floor.  It’s long enough to give me plenty of work space.  It’s shallow enough that it’s as easy as working on a regular surface – but has the short walls that prevent small pieces from rolling or falling away.
  • Working on large parts/Storage: I own a VERY large library card catalog (it’s a long story).  It’s about 6′ long, with 60 drawers on the front and another 60 on the back.  It stands about 4.5 feet tall and is about 3.5 feet deep.  It’s basically perfect for storing an enormous amount of small parts of … whatever.  I’m only using about three of the drawers so far for MakerBot parts.  It also serves as my large work surface.