Tag Archives: mendel

Enney Meaney

Posted on by

It occurred to me today that a lot of people are using their RepStraps to build Mendel parts.  Then I wondered, “How many Mendels are in operation now, anyhow?”

I would guess a dozen or so – with far more on the way.  What I find interesting is the seemingly large proliferation of Mendels (or, at the very least, blogs about Mendel parts and construction) versus the dissemination of Darwins within the prior year.

If this is the case (and I really have no evidence of this, just my impressions), is it something about the RepRap project that has suddenly taken hold?  Something about the Mendel over the Darwin?  Is it the increased RepRap documentation, more YouTube/Vimeo videos?  Is it the availability of parts on eBay, plastic/resin parts from molds, or something else?  Is it MakerBot?  Thingiverse?  Facebook, Twitter, MakerFaires, or MakerTweetBook?  More mainstream coverage in the media?  Was is health care reform, killer bees, or the loss of the Mars rover?  Is it subliminal messages embedded in the MakerBot website?  Have we been plugged into the Matrix?!?!

I know someone is going to say “a combination of these things” – but really, if you had to pick one thing, what would you say it is? 1

  1. P.S. I’m voting for the killer bees. [↩]

Fair wages for Robots!

Posted on by

Several hours ago I posted about two eBay auctions for full sets of Mendel printed parts.  I just checked on them to check out where the two auctions ended.  One ended at $446 (actually, at 330 Euros, for a seller located in Ireland) and the other at $455 (seller located in Ohio).

Why, then, would an auction just two days ago go for $630 (rather, 420 pounds)?  A sale at 420 pounds implies someone else was willing to bid 415 pounds.  I’m guessing it’s a combination of factors that went into a $600+ sale – perhaps because the English really want RepRaps, people wanted to support Adrian Bowyer, anyone who bought RepRap parts from Adrian himself can basically be assured they’re getting quality parts.

This tells me $450 seems to be the going rate for a set of Mendel parts (for now).  This raises an interesting conundrum.  Will the prices go up as more people become interested in RepRap?  Will the prices go down as people start printing and making available more RepRap parts?

Either way, suppose the going rate is $450 for 60 ‘bot hours.  That’s $7.50 an hour.  This is less than the minimum wage in California!1  This means if human help is required at all in the production of RepRap parts, the entire process is taking longer than 60 hours and the hourly rate is even lower than $7.50/hour!

I’m not saying RepRap parts should cost more.  I’m just saying I was really getting used to the idea of a gnome sitting in my living room earning above minimum wage while I slept.

Oh well, I guess I’ll just have to take solace in running a robot sweat shop.

  1. $8/hour right now [↩]

Mendel FAIL

Posted on by

I can’t find my camera, so my camera phone will have to do. Here was my second attempt at printing Spacexula‘s Mendel production STL files.  Don’t even ask about the first attempt.

RepRap Mendel FAIL

RepRap Mendel FAIL

Spacexula offered some advice on how to fix this.  I have the Stretch feature turned on so that I can (hopefully) print better small circular features without the parts getting all globby.  He suggested turning Stretch off and just drilling out the holes if needs be.  Wise words from a man cranking out Mendel sets.

Unfortunately, I won’t have time to spent printing up parts until the weekend.  :/

These parts are not unusable.  Of the 13 parts on the sheet, I think five are probably perfectly serviceable.  The tall toothed gears are the most miserable parts – they are swayed and the teeth are basically intermittent bumps.  This has been one of my least successful completed prints in a long time.

Anyone want some Mendel parts?  Drop me a line.

My own plastic gnome

Posted on by

1. …or Minimum Wage Rights for Robots!

MakerBot posted a screenshot of a RepRap Printed Mendel Parts auction that sold for 420 pounds – roughly $630.84. 1  2  Others have been posting RepRap Mendel auctions as well.  One just sold for roughly $453, another for about $270, with two more auctions around $450 each with at least 3 more hours to go.

Using Spacexula’s Mendel production files, 24 STL sheets of parts, averaging 2-3 hours a print, we’re talking roughly 60 MakerBot print hours. 3  Assuming I only have the patience to print up one STL sheet a weekday and two sheets on the weekends, starting on a sunny Sunday like today, I could finish in 19 days.

Assuming very little human intervention, $600 for 60 hours of MakerBot operation is a pretty good deal.  It’s like having a fussy gnome who eats electricity and plastic living in your home and earning just above minimum wage for you. 4

  1. According to Google and at the time of this post. [↩]
  2. I couldn’t find a link to the actual auction at first, but then figured it must be a private auction.  It turns out this was the RepRap eBay auction posted by Adrian Bowyer a little while ago.  You might need to be logged into eBay to visit that link. [↩]
  3. This assumes no failed prints. [↩]
  4. You know, like those shoe gnomes that made shoes for the cobbler in that children’s fairy tale. [↩]

Help with a RepStrap alternative list

Posted on by

I’m trying to put together a list of all of the RepRap/RepStrap alternatives out there. 1  Later I’ll put up the list with links to their instructions and where to get parts.  Here’s what I have so far:

  1. RepRap – Mendel, Mini-Mendel, Darwin, McWire
  2. MakerBot
  3. RepMan
  4. ShaperCube
  5. Profound Devices
  6. Tommilese

Am I leaving any out?  If so, please leave a comment.

  1. Mind, this is just a list of those open source 3d plastic FDM printers, where the plans and instructions are available.  It’s not meant to include those machines people are building on their own or converting existing 3axis CNC’s into a RepStrap. [↩]

Replicating without a RepRap

Posted on by

I’ve read others writing about creating molds for pulleys and molded RepRap parts.  Is this something you do?  Several of the Mendel sets on ebay appear to be parts cast from molds.  This would seem to be a very cost effective and relatively quick way to replicate parts.

At the same time, I’m not sure just how useful it is.  The best thing about a RepRap/RepStrap is you can tell the robot to build you something while you go out for a beer or take a nap.  Casting molds (from the reprap.org link above) seems to be a more involved and detailed process require a fair bit of human intervention.

Given that a set of printed or molded parts are selling for upwards of $400, I have to wonder why no one has stepped up to create a huge mold with all the parts and just start stamping them out.

I also wonder – if everyone had all the plastic/reprap’ed parts they needed – what would the next bottleneck be?  Electronics?

New print: Beco Block!

Posted on by

I printed up my first Beco Block today – and I can’t wait to print up more.  Nate True was kind enough to download the STL files, center, align, save, and zip all of the various pieces. 1

I’d like to see a new STL file out there that has several different types of these Beco Blocks all on one sheet (similar to Spacexula‘s Mendel production STL files).  I could really see myself cranking out these by the dozens.  In fact…  once I had a sheet designed with a good mix of the various parts I could put it through the MakeNBreak script to churn them out.

  1. Nate, if you’re listening – thank you! [↩]

RepRap interim challenge obstacles

Posted on by

The RepRap challenge has a number of obstacles for the interim award.  There are two in particular that seem insurmountable.

  1. Maintain a total materials and parts cost under $200 and that 90% of the volume of the printer parts be printed.
  2. The ability to print autonomously without a PC attached.

I have to imagine something large enough to accomplish all of the other goals would cost well over $200.00.  If an entire Darwin or Mendel were trasmorgrified King Midas1 style into pure plastic, I would think the plastic alone would eat up 90% of the budget.  Even the best deals around the internet for RepRap parts just the electronics are roughly $215.

I say it seems insurmountable – but if someone had told me two years ago I could one day buy a full kit for building a robot that would make me any plastic thing I could imagine for $1,000.00  I would have laughed at them.

  1. or Calvin and Hobbes [↩]

Printing mendel parts

Posted on by

I’m not even sure I would build a Mendel if I had all the plastic parts.  But for some reason I still want to have all of those parts.  I have no idea why.  :)

I printed up a single spring out of PLA before my extruder got clogged up.  It’s my one and only Mendel piece.

Having this one piece languish next to my MakerBot strikes me as funny.

I think there’s a haiku in there somewhere.