A few thoughts about operating a DrawBot, in semi-organized fashion:

• Vertical Surface Drawing.  There is an interesting tension in the design of a vertical line-driven drawing robot.  As the drawing surface orientation approaches horizontal, the easier time the robot will have using a standard pen to draw, the more difficult it will be to control the drawing component via a line system, the  greater the weight that would be required,¹ a greater weight puts a greater stress on the line and the motor and has some effect on the responsiveness of the drawing component, and the more the weights on the drawing component would be in contact with the drawing surface – possibly causing smudges.  The closer the surface is to vertical, the easier it will be to actually operate as a line-driven robot, the less weight required,² but the more difficult it would be to have a pressure from the drawing component on the drawing surface.
• Robot Portability.  Right now my robot is quite portable – and, of course, there are costs and benefits associated with this.  Right now I’m limited to the “size” of my robot at 2′x4′ since that’s the size of the piece of plywood I bought and on which the motors are mounted.  However, it is very easy to just move the robot by putting the plywood in a different location in the house.
• Robot Location.  This is, in some senses, the flip side to robot portability.  I’d love to put the ‘bot up on the wall and draw something really really huge.  I don’t see that happening until I’m more comfortable running the robot, have found a better pen/paper combination, and – perhaps most importantly – figured out how to run the robot wirelessly or off an SD card.
• Drawing To-Do’s:  Ideally, I’d like to put the robot to work drawing something on an epic scale.  A high resolution photograph of earth, moon, or pretty much anything from NASA.  Perhaps a map of middle earth, the 100 acre woods, or the Princess Bride story?  A photograph of the world at night, with highlights of the world’s electricity consumption.  Or, some of the INSANELY awesome super sweet posters from various XKCD comics.

1. This my theory, anyhow.  My reasoning is that as the surface approaches horizontal, the more weight you’d need to pull at the drawing component because more of the force of the weight would be absorbed directly by the drawing surface itself – along with some friction as it passes over the surface as well. [↩]
2. See reasoning regarding weight above. [↩]